Everyday Events (Work Log)– category –

Next, let's disassemble the front fork. There's some light surface rust on the inner tube, so I'll check on that later. The fork oil is clean. Cleaning is co...

From Kyoto This is a Bandit 1200 K6. We received a work request via depot delivery from a distant location. Thank you very much. Though a bit delayed, I'd li...

The inspection was completed this morning, so now let's move on to mini maintenance. It looks like the access issue wasn't caused by the PC after all... thin...

The engine is a bit of a concern, so to speak. What do you think? The cylinder leak tester made its comeback after a while. It's a well-designed tool. There'...

Good morning. Looks like it's going to be a nice spring day. My eight-year-old XP at home has been acting up? I'm not sure if it was because things were hect...

Let's get the Bandit 1200 K6 ready for inspection. Headlight alignment and brightness are good. Exhaust emissions adjusted—all set now. We'll bring it in on ...

It ended up taking this long… I was back at the shop by 10:30, but the inspection center was incredibly crowded. After the first round, things got pretty bad...

With a break in the clouds in the evening, we took the opportunity to do an oil change. We performed the change on the NC50. Glad it cleared up!

Now let's get ready for tomorrow's inspection. I was able to adjust both bikes without any concerns, and I'm relieved everything is in good shape. I'll bring...

Today we'll perform oil-cooled maintenance. The engine damper is in good condition with no severe wear. The damper shows some hardening and wear, but it's no...