Everyday Events (Work Log)– category –
-
Bandit 1200 K6 Oil-Cooled Maintenance and Window Part 4
It's a Bandit 1200 K6★ Oil-cooled maintenance and the oil level window are acting up The damper was stiff as a board. Th... -
GSX-1400 Flat-Rate Motorcycle Inspection
Well the light intensity is pretty good emissions are OK★ I'll head over on Monday~ The old blog is here★ -
K1200S & GSX-R1100 NUTEC Oil Change
The weather is nice but it's really windy today. We discovered today that it's faster to suck the oil out since it doesn't flow well from the t... -
Z1R Brembo and Hose Work
This is the Mayomayo bike. Installing a Brembo master cylinder and fabricating the hose. I won't be able to finish today. Checking the parts. &n... -
GSF1200 Carburettor Maintenance and Tank Rust Removal
The oil smells a bit like gasoline, so let's get it changed ★ That's sketchy. Throttle cable gets replaced with a new one too  ... -
GSF1200 Carburettor Maintenance and Tank Rust Removal
It's warm today, isn't it? If the float were secured more properly, I'd think there'd be no need to check both the float level and the actual fue... -
Skywave 650 NUTEC Oil Change
Well You had made a reservation, but I completely forgot about it… At least I didn't go out. I haven't been to Sentoku~ I'll make sure to order t... -
GSF1200 Carburettor Maintenance and Tank Rust Removal
If I don't keep moving forward, this is going to become incomprehensible. Partway through If it's just a few hundred yen, I'll repl... -
Bandit 1200 Mini Maintenance and Alpha
Continuing. There's oil present! Even a bit worn, it looks clean Secondary air full open mode A light air... -
Bandit 1200 Mini Maintenance and Alpha
It's getting warmer, so here's some maintenance. The shift shaft is leaking fluid. It's not pressed in very tight, so with an L-sha...