Blog

   The spark plugs are worn out, so please let us replace them.   JR8B is not set to 2-pole.   We replaced the NUTEC NC50 and o...

   Well now, the GS1200SS has top-notch serviceability★   There's slight scuffing on the intake side of cylinders #3 and #4.   ...

   A hugely popular GS1200SS it is. This time we have oil-cooled maintenance and a few other requests. Oil-cooled engine maintenance… ¥38,640. A me...

So here goes… Honda's plug cords are so good that the plug cap and cover are molded as one piece. Swapping to a Uotani coil means replacing the plug cord too...

Today we had intake consultations and some time away from the shop plus paperwork and other things to handle, so we could only manage light work.   &nbs...

   The owner's custom stand arrived, so I'll get it installed right away and finish things up.    It's solid, but it's really well made. ...

I need to get today's work done…    With clip-on handlebars, a GR71F will work fine with the cable—no problem. But what if we go with a rise handle...

    So the hub damper isn't installed. Is that surprising now?     Cleaned the caliper ★ Since we serviced it last time, it's in excellen...

   A washer and M5×0.8 bolt with Loctite in such a spot—it snapped right off on the first try, so I had to remove it. It was an easy spot to drill,...

Hello there, before you know it! So today we're working on a VFR750R again ★ Rear maintenance … ¥25,200 The swingarm is the heart of a motorcycle. It's a spo...