Carb Maintenance– tag –

With a filter like this, we can remove large debris. Keep in mind that flow rate may drop somewhat.   Since we're reusing the filter, checking the depth...

The working carburettor is also disassembled, cleaned, and adjusted to run smoothly. Yesterday, a Bandit 1200 that has already passed inspection. The request...

We'll continue working on the Z1. The owner requested that we check the master as well. It makes sense—the owner was picking up on something off about it. It...

Install the thin fork, axle, and steel fender without putting strain on them. Since the fork lower is clamp-style and somewhat loose, it will twist slightly....

Let's service the brake calipers. It looks like it's been maintained. The dust seal cover tends to develop some rust. It's a bit rough, but the condition loo...

Wheel bearing replacement. You can see the maker's intent on the wheel side. The insertion clearance is shallow. You can see that the insertion clearance is ...

Let's replace the wheel bearings. Japanese-made oil seals are currently installed. No spring either. There aren't any particular issues, but since we're repl...

Let's check the front fork. This is a fork type without metal. The bottom case lower side wears barrel-shaped and can develop symptoms close to steering play...

With an old machine like this, you never know what might have happened in the past, so let's check carefully and proceed. The lower side is a bit rough. I im...

Parts are gradually coming in, so today we'll work on the front area. Since we'll be disassembling the caliper, it's easier to loosen things beforehand, but ...