Deco-mainte– tag –

GSX1100S main harness replacement, wheel bearing maintenance, Deco-mainte, NUTEC oil change and more on request. For an air-cooled four-cylinder, thirty minu...

If vacuum cannot be obtained, we confirm synchronization with this gauge. The pedal has shielded bearings, so we just cleaned it and applied a light coat of ...

Bandit 1200 K6 Flat-Rate Motorcycle Inspection Deco-mainte NUTEC Oil Change request. We remove the front and rear wheels and check them. It's good to clean t...

Let's perform Deco-mainte. I don't think it will run amazingly well, but by disassembling and checking it once, I believe we'll discover many things we would...

The Inazuma 1200 Katana is a great-running oil-cooled machine. #1 Gasoline was seeping from the joint, so we took on the job. The condition was good overall....

The inspection is complete, so let's get started on Deco-mainte. The control levers benefit from occasional disassembly, cleaning, and lubrication—this preve...

Deco-mainte continues. We'll replace the spark plugs. The fluid is quite cloudy. This might be a good time to change it. The carburettor synchronization on t...

Inspection and Deco-mainte The levers, pedals, wires, and throttle still had plenty of lubrication on them. However, as time passes, the old lubricant does g...

ZZR1100D continued. The fluid had the clutch a bit dirty. It wasn't in too bad a condition though. I also balanced the carburetors. You can feel confident ab...

ZZR1100D—the ZZR used to be everywhere on the road, but these days you hardly see them anymore. The levers show grease marks and look pretty good. The cables...