GPZ750– tag –
-
[Maintenance Log] Starter Motor Slipping and Spinning? GPz750F Starter Clutch Slip Prevention & Precision Overhaul
With earthquakes and heavy rains, that nagging unease won't go away. I see it on YouTube videos from people who've experienced disasters—"I'm so glad we did ... -
[Maintenance Log] Eliminating Idle Rattle! GPz750F Clutch Housing (Primary Reduction) Play Inspection
My Zephyr 550 and GPZ550 have the same structure. My bikes do make some noise too, but it's not bothersome. The customer brought in upgraded parts, so I'll b... -
GPZ750(F) Yoshimura digital temperature gauge installation, oil change, EBC rear disc replacement, fluid, fuel sensor replacement, and more
Once I removed the carb, I encountered a severe overflow and was somewhat surprised... This happens occasionally, doesn't it... mysterious. Well then, let's ... -
GPZ750/GPZ750F Main Key Won’t Turn OFF
Well then, the main key won't turn off and there's a current drain. The battery is completely dead. I'm pretty sure it's the key. I really hope it's just the... -
GPZ750/GPZ750F Inspection, Fork OH, Sprocket Replacement, Tire Change, Crack Repair, etc.
Since they wanted to use it tomorrow, I'm rushing to get it done ('ω')ノ This is a Continental RoadAttack 3 CR—a rare radial tire. For this size, it's quite ... -
GPZ750/GPZ750F Inspection, Fork OH, Sprocket Change, Tire Change, Crack Repair, etc.
This GPZ750 has quite a bit of character to it...The super fork had an oil leak, so I'm fixing it by replacing the inner tubes. And other things too (*´з`) T... -
GPZ750(F) Inspection – Throttle Sleeve Replacement
Nitron delivery on backorder; oil temperature sensor BO in progress So we're going ahead and replacing the worn throttle sleeve. The OEM one has bumps on it.... -
GPZ750/GPZ750F Shell Advance oil change and pad replacement
Real aging looks fantastic (*´з`) – it has that worn leather, axe, or boot kind of patina. It's great to see it actually worn down from real use. Pad replace... -
GPZ750F Inspection, Swingarm Replacement, Boss Welding, Rear Brake Hose Fabrication, and More
Well, well... One thing after another, and we ended up going back to the original swingarm (；∀；) I thought we could just grease it up and reinstall it... C... -
GPZ750F Inspection, Swingarm Replacement, Boss Welding, Rear Brake Hose Fabrication, and More
Ding-dong! (´ρ`) I'll say it again: we're closed Mondays and Tuesdays, even on holidays. If an earthquake hits, we'd be in trouble, so let's go ahead and ins...
12