GSF– tag –

This GSF1200 shows signs of wear throughout. Let's inspect each component and clean it up. The steering stem shows no signs of previous disassembly, but it's...

GSF1200 in a rare red and black finish came in for a Flat-Rate Motorcycle Inspection and self-point maintenance. The side stand should be disassembled occasi...

Continuing with the rear section: let's perform maintenance on the swingarm and linkage areas. For Suzuki bikes, removal takes 30 minutes. Bearing extraction...

GSF1200 total maintenance and more—we're on the job. First, we disassembled the steering. The oil had already drained out, leaving it bone dry. We replaced t...

Front maintenance + SKF & A.S.H. Overhaul…… an additional ¥70,000 was requested. It came right off. The grease has hardened too. The contact surface is s...

The inspection is complete, so let's get started on Deco-mainte. The control levers benefit from occasional disassembly, cleaning, and lubrication—this preve...

Self-point maintenance has some flexibility, so please let us know. We'll also replace the tire air valve at the same time. Let's clean the calipers too. We'...

Rear maintenance, self-point maintenance, rear shock and other requests. Overall it's dirty, but it looks like it may have been replaced once. The condition ...

The clutch is slipping, so let's install an FCC kit. Let's check the current condition. Only the steel plates were replaced and 2 mm was added, but it didn't...

GSF1200 Stock Carburettor Maintenance+ (OH)……¥53,400 I don't think there are any mistakes, but let me double-check. I'll replace the starter valve too. If th...