GSF– tag –

Now, continuing with the helicoil.    Why are the threads so damaged like this?    When I removed it to install the helicoil... oh no! &n...

From this morning     Two bikes completed. If you're having trouble getting an inspection for a custom motorcycle, please feel free to reach out to...

I've been going back and forth on whether to go tomorrow, and now I'm finally getting started on the prep.    We managed to work around it with a d...

   Drilled holes, embedded bosses, and welded them up.    It was a nice bracket, so we reused it.    I basically hate nuts, so ...

   The caliper bolts have been replaced, so I'll do a quick check just to be sure.    The support threads are stripped... it's already co...

Continuing.     Side stand lubrication and shim installation     Synchronization     adjusted. That's about all I can do for no...

   Something's melted again... doesn't everyone's melt too much?    I'm kind of impressed by this weird multi-tap! You can plug in a flat...

   Alright everyone! The fall inspection season is here★ We'd be thrilled if it were inspection season year-round, so please feel free to reach out...

Well, at a time like this...     Grinding away from this morning too.     Going to cut threads on the circular saw With a tapper, I can c...

I hate milling because the chips get everywhere.    Right away I made three LENOX Dimastar 2 blades to try them out. I made three blades at 2.4 met...