GSF– tag –

A GSF1200 with low mileage is now quite rare. I have a strong feeling the GSF1200 is heading toward extinction. This one came in for an inspection and oil-co...

Inspection and self-point maintenance work requested. First, we'll clean the calipers on both sides. Brembo's cast calipers tend to accumulate dust easily an...

We had a request for an inspection and self-point maintenance. Let's clean the caliper. • Remove dirt • Piston operation (check for stiffness) and condition ...

Let's perform valve clearance adjustment. #1 IN granular scoring. #1 EX granular scoring #2 IN #2 EX granular scoring #3 IN granular scoring #3 EX granular s...

GSF1200 oil-cooled maintenance request. We'll make a VR2 judgment based on the situation. The engine damper was in quite a sharp condition. Time to clean the...

Now for the Exact wheel installation that was brought in. I checked the chain line and overall width just to confirm. Since it was for the GSF, there were no...

Undercowl installation, Exoat wheel swap, and Yoshimura cover replacement were added to the order. The delivery came faster than expected, which is nice but ...

Now that I have all the materials, I'll continue with the work.   The angle was too tight and it got stretched out and squeezed. At 45 degrees it should...

SDA single seat with smooth curves. It goes on quick, but there's some prep work involved. First, cut the punch mesh, drill the holes, and secure it with pus...

Let's install the OHLINS front fork. First, we'll replace the stem bearing. The condition wasn't great, so we're replacing it along with the stem.   Onc...