GV73A– tag –

The weather looked good, so I headed out right after picking up the bike. That said, preparation is necessary. I worked quickly and smoothly without any wast...

Let's install the parts. The main body can't be welded, but I managed to fit it nicely. This is my first time installing a Hot Inazuma, but no matter what I ...

Let's perform OEM carburettor maintenance. Cylinders #2–4 had a bit of rust buildup, but nothing to worry about. The slide body shows no significant wear, so...

Let's perform oil-cooled maintenance. The generator damper was in good condition for its year. The viscosity, which shows the passage of time, is lovely. The...

Let's make sure safety checks are done with a careful visual inspection. I'm making a wish that the good condition lasts a long time. When the frame gets hot...

Today we're going to do some front maintenance. We have three different front maintenance menu options available. • Fork OH + stem lubrication and adjustment...

I always think there must be a better way to secure this hose clamp, but I end up securing it this way anyway. I always think it's a miracle that Suzuki even...

The rear cowl is off, so we'll show the complete picture after finishing. I apologize for the time that has passed since we took it in. Work is progressing s...

The wear on the 1-1 rocker of the MN was surprisingly good, which seemed unusual. Wear is basically present, but it didn't look too bad. This type uses shims...

  Let's perform oil-cooled maintenance. Now that the inspection is complete today, we'll proceed with the oil-cooled maintenance. The engine damper show...