Vehicle Inspection– tag –

Let's finish up the remaining work. We'll replace all the fluid. The oil had bonded on and was quite difficult to remove. It's been a while since we've seen ...

It's been sitting so long it won't start… and it smells like death rather than gasoline. Let me check it out first. It's looking pretty rough in here… The pi...

Let's check the wiring. When I open the light to reset the turn signal... there's a multi-tap. The work might have been done by me in the past. It's clear ev...

Let's fabricate a muffler bracket. The Yoshimura silencer is fairly heavy, so I'm thinking of going slightly thicker than usual. Making the collar is quick, ...

This GSF1200 had been sleeping for quite a while, but the condition is absolutely pristine. The tires are Mez Lensport... but we'll set that aside for now. T...

Today we were saved by the strong wind. It sure gets a lot of unhappy looks... two-stroke. Well, we successfully completed the inspection and headed back to ...

The 500 MACH III is a very rare two-stroke these days. It's incredibly dim, so I'm bringing it in with a kit and direct battery wiring that I made before. Th...

RAM air filter comes included—we recommend not applying oil to it. It has a very creamy appearance. The areas where the carburetor tuning was off show discol...

Let's remove the wheels and inspect the bearings and such. The rear is fine, but the front axle won't come out without tapping, so I'll check that. I see! Th...

The other day, we received a request for a flat-rate motorcycle inspection, Deco-mainte, and new tech oil change on a GSX1100S that had already passed inspec...