Air-cooled four-cylinder.
Access to the spark plug is the best (*´ω｀*)
But here’s the thing～
When inserting, you can go straight in, but occasionally there’s a chance it might go in at an angle.
A game to reduce the chance of messing up?
I hope this is helpful. . .
(´∀｀*) ｳﾌﾌ The big sale once a year, Amazon Prime Day 7/12・13
The swivel doesn’t rotate smoothly.
There’s a chance it could go in at an angle.
If you damage the spark plug hole entrance, it becomes difficult to turn it in by hand.
Not breaking it and not messing up is extremely important.
A little carelessness creates big losses (´ρ`) *Self-inflicted
As long as the inner diameter matches, pretty much anything works.
But something with a decent outer diameter is easier to turn (*´з`)
I use a silicon hose (the one lying around the shop).
It’s extremely flexible and so far, it works really well.
Really! Just inserting it ( *´艸｀)
You don’t need to force it in that tight. Just smooth and easy turning is fine.
The care not to damage the plug hole. . .
Just prepare one hose and you’re good.
You could turn the plug wrench and swivel as-is, but the length often falls a bit short.
And since it’s metal, you can get away with a little forcing.
A few seconds? A few minutes? The time you save is probably just spent looking at your phone anyway, right?
Cross that bridge carefully. . .
If you’re doing the work yourself, be careful. . . okay?
