The mask makes quite a difference in appearance. The inspection is already complete.
I’m not sure how much clearance there is on the wheel-side bearing press fit or how the distance collar is positioned, but it felt like it could use a bit more pressure.
The rear looks good.
The wheel was off for a reason, so I’ll get it back on.
The calipers are in excellent working order—the owner maintains them well.
Let’s clean and reassemble.
The rear was in good shape too.
The torque rod side is risky, so I drilled a hole for a safety wire.
Let’s drop the cover, oil it up, and clean off the rust on the inside.
