デコボコ– Author –

Continuing from before~ Oil is leaking from the starter motor too. The number of places I see it leaking from keeps growing year after year. With oil leaking...

For a while now, there's been this strange problem where the clutch won't disengage when the engine gets hot. It's been getting worse and worse, so the bike ...

The GS1000S looking stock is nice~   PAMS MOSFET regulator. Since it's large, we needed to modify the mounting. We tried to keep things as simple as pos...

Stalling suddenly while riding? That's quite a tricky issue. And it happens intermittently, apparently. Let's simplify things step by step. First, secure sol...

Initially we were planning just a fork oil change, but we decided to go ahead with an OH since there was a slight seep. I'm the type who likes to push forwar...

It's been a month since we took it in, and I find myself taking advantage of the owner's words that there's no rush. The rear brake feels spongy. Since we're...

The bead roller gets deployed a few times a year. It's surprising how often you need to attach and remove the dies. You need a proper place to store the tool...

Since it's large, let's leave it with us for a full day. Engine oil in two places and gear oil. The gear oil is clean. The oil level hole in the center was a...

The connecting plate arrived, so let's install it. Three out of four pieces had cracks. Since it's in the choke passage, it shouldn't cause any problems, but...

The master parts have arrived, so let's get to work. Here it is. It worked out pretty well considering I went in blind. The rear was different though… That s...