デコボコ– Author –

For electrical peace of mind, I decided to install a PAMS MOSFET regulator. I always use this universal-type version. It's pretty big—the surface area makes ...

We used what we could and made it look the part. Let's change the fluid. Ideally once a year, or at minimum every two years is better. I made a bracket for t...

Let's do some self-service point maintenance. The aluminum fittings look like this, so you need to be careful. Amazingly, it doesn't leak—I'm impressed. Firs...

Now let's get to the actual work. We'll wipe down the chain thoroughly and give it a good cleaning. The idling, which had felt sluggish, now sounds like a pr...

Let's perform front maintenance. This time we're replacing the inner tubes. It's a phenomenon unique to inverted forks where they always wear down at the sam...

Does a vacuum carburetor look shabby because of corrosion and deterioration? I'm not fussy about maintenance cycles—the stock carburetor is wonderful because...

First, let's modify the side stand. If we spend too much time on it, making a new one would be faster and more cost-effective, so we'll keep it simple. A sho...

The OEM clutch is good, but the FCC clutch features new processing and friction material. It offers high reliability and often costs less than the original. ...

Before looking at the tappets, let's finish all the dusty work first. The helmet holder bracket wasn't needed, so we removed it. I'm working it like shaving ...

The bike was running great and getting ridden hard when the clutch started slipping, so it came into the shop. The clearance is quite generous. A tighter cle...