デコボコ– Author –

The inspection is complete. I'm going to keep the maintenance light. I'll wipe down the chain thoroughly, then oil and adjust it. Both left and right levers ...

The other day it came back to life after fixing the fuse contact. But now it's stopped lighting up again... Without the bulb inserted, we get 12V OK! Ground ...

GSF1200 oil-cooled maintenance work underway.   First up is the generator damper replacement. It still had more elasticity than expected. Let's swap it ...

The hub arrived. We ran out of drive sprocket lock washers in stock, so we got partway through— When you heat it in the oven, it expands in this mysterious w...

The inspection was completed this morning, so let's keep moving forward. No progress shots. It's the N switch and starter motor O-ring. Steering had a bit of...

We're making steady progress. The intake manifold is polished and looking clean There was no gasket, just liquid sealant, so we'll make one. Having the right...

A museum-quality BMW R26. It had been in long-term storage and stopped running. Let's get it running again. Remarkably simple construction—really impressive....

With a 180/60 tire, it got wider and the chain started hitting. Let's check how much clearance we can get. Well, before that I checked it by hand. The counte...

Let's continue with the work. Since removing the single seat cover is a hassle, we're going with a zipper instead. Personally I don't like drilling holes in ...

I got the inspection passed, but there's surprisingly a lot to do and I'm getting fed up. All of a sudden it stopped charging. When I checked with a simple t...