デコボコ– Author –

It doesn't look like there's an extra 3 liters. I couldn't tell the difference with just the tank alone. It takes on a slightly more rounded appearance. An e...

This looks handy. Since delivery seems to be taking a while, I'll go ahead and deliver it as is for now. I replaced the terminal with a new straight one. The...

Due to time constraints, I'm making a damper bracket. I cut the stainless steel plate into a triangle shape, added ribs, and did some hole forming. Using a d...

Let's install the Z1R fairing. ↑ This is the positioning jig. We'll use scrap stainless steel pipe for simple positioning. We're making it flexible enough to...

The Bandit 1200 K6 has already passed 11 years. So the last bastion of oil-cooled parts is also 11 years old… I'll do some prep work partway through. For som...

I'm captivated by the Dellorto logo. Truly Italian craftsmanship.   The regulator is apparently hidden under this panel. I've never seen anything like t...

I wonder how many years these wheels have been sitting around. Finally time to install them. The attachment was custom-made by a fabricator. It turned out be...

Let's continue. In the end, using the blue one seems to have the same layout anyway… Since it's easy to attach and detach, let's call it good. There's nothin...

Let's replace the main harness. It's safer to replace it while you can. I think you'll have peace of mind while you own it. The ground lead wire is soft and ...

Continuing from before. That 90-degree angle is awkward to work with. It would be so much better if it were around 20 to 45 degrees. We replaced it with a st...