Blog

. Let's replace the tires. This time we're going with Pirelli Sport Demon. For the air valve, I chose Ariete aluminum. You don't have to worry as much about ...

.   The inner tubes came back from re-plating, so let's assemble the forks. They've come back looking brand new. The surface finish is excellent. The ru...

. These are changes and points noted since the last maintenance. A famous brake disk. This is a liter bike that reaches high speeds. Let's make sure to equip...

. Post-processing PINGEL petcock installation. Fine debris tends to get in, so we want to avoid using a rotary tool. We've made a jig to cleanly extract iron...

. Brake hose fabrication was also added to the order. First, we fabricated a bracket to secure the angled (45-degree) TEE-FIT using a method that's as straig...

. Foreign-made tires don't list the outer diameter in catalogs or on the web… The rim went from 5.5 to 6.0, so this time I went with a 55-profile all-purpose...

. A story from a while back… (still in progress, though) Let's change the wheel color and give it a fresh look. The two of us agonized over it for two weeks?...

. Homemade single-eye headlight that's incredibly lightweight. The way it's bent so cleanly is amazing and impressive. DIY is truly fearsome! It's tedious to...

. The starter wouldn't turn, so it was an emergency tow job. *Basically, I don't go on tow calls myself, so make sure you're prepared to arrange a tow throug...

. Uotani Full Power KIT installation and ELF MOTO4RACE oil change, among other services requested. First, we start by fabricating a bracket for the Uotani co...