Blog

Yoshimura GSX-R750 TT-F1 (2013/09 photographed at BrightLogic.)

I'll keep trying a bit more. It shouldn't be that complex a structure. I removed only the hydraulic lines. There's no metal in the structure—it's all rough a...

The hydraulic pressure stopped building up... Let me give it a shot. Bleeding air and changing the oil had no effect at all... I'm guessing it's either a che...

We'll continue with the work. Just a little more until completion. We'll adjust the synchronization. The deviation is slight, so no worries. If you ride it, ...

Triumph Tiger 800XC tire replacement and NUTEC oil change service. We performed a hand-assembled tire replacement. Oil is NUTEC NC50 10W-50& oil filter. ...

We'll continue with the work. The grease around the levers is pretty much gone. I've also disassembled, cleaned, and lubricated the throttle. I'll replace an...

Let's continue with the maintenance. A Brembo-style chrome caliper is installed. It appears to be functioning without issues at the moment, but considering s...

We can't just hand over the oil cooler as is. I'm torn between whether it's easier to repair the cooler or to fabricate a bracket. Roughly, this is the cente...

I think everyone prefers a clean finish if possible. Hmm. There's Devcon here too... I removed it but found nothing underneath. It was just sealing it. Both ...

This is a GSXR1100. It's got quite a sharp specification to it. Overall it looks pretty whitish. It's in a very dirty condition. Lifting the front up... on t...