Polishing– tag –

This one turned out to be surprisingly difficult. I'll say it again: Decoboco is not a custom shop. I needed to return the needle to standard, but this cap w...

Front maintenance (fork OH + stem lubrication) + bottom polishing Sunstar premium disk & RMZ pad service kit etc. This is what was requested.   The ...

Let's install the Plasma V Plus (16V).   Before installation, you need to measure the amperage per coil (one at a time). The Plasma V Plus (16V) toleran...

Let's replace the wheel bearings. Replacement isn't the end of it—you need to adjust them after they've broken in. The front oil condition is excellent. Oil ...

Recently we've been offering a polishing service (for a fee) to refresh parts as well. We're always researching, so please feel free to consult with us. Firs...

GS1200SS Flat-Rate Motorcycle Inspection, Front Maintenance + SKF Bottom & Stem Polishing, Wheel Bearing Maintenance, D.I.D ZVM-X& Sunstar Service Kit +,...

Work is complete, so here's my report. The calipers and bottom case came out beautifully clean and refreshed. I reversed the brake hose bracket to support fr...

We're almost done. It's just the fine details left. Let's replace the hub damper and rear wheel bearing. The hub side looks like I applied grease to it befor...

Between comings and goings, I've been working on a few custom pieces in the gaps. I fabricated a digital gauge bracket and an ETC antenna bracket. I went ahe...

After a test ride, I'll make a few minor adjustments to areas that felt off. Sorry for the pin heading toward the meter. The clutch lever is bent and catches...