Production– tag –

The connecting plate arrived, so let's install it. Three out of four pieces had cracks. Since it's in the choke passage, it shouldn't cause any problems, but...

And just like that, it's done. I'm surprised it didn't take as long as I thought—maybe I'm just getting better at this? I'll cut it and use the lathe to shap...

BECO-chan. Actually, this is my first time seeing one… What a labor-intensive meter, right? The gear position indicator, which was widely adopted in this era...

Let's perform a valve clearance adjustment. To be honest, I don't think valve noise gets too bad very often. What does happen is the cam can seize, the rocke...

Today we're going to do some oil-cooled maintenance. Recently, starter motor O-ring replacement has been included as part of the package too. It's great to b...

The cut sheet metal goes tumbling down the slope at quite a speed… It's noisy, and there's something unsettling about using material that's fallen on the gro...

For electrical peace of mind, I decided to install a PAMS MOSFET regulator. I always use this universal-type version. It's pretty big—the surface area makes ...

Now let's get to the actual work. We'll wipe down the chain thoroughly and give it a good cleaning. The idling, which had felt sluggish, now sounds like a pr...

Does a vacuum carburetor look shabby because of corrosion and deterioration? I'm not fussy about maintenance cycles—the stock carburetor is wonderful because...

First, let's modify the side stand. If we spend too much time on it, making a new one would be faster and more cost-effective, so we'll keep it simple. A sho...