Production– tag –

The meter pitch is the same—looks like it'll work but it won't. The shape is problematic too. Drilling a slightly larger hole with the drill press sounds lik...

Let's work on the GS750 we picked up the other day. First, I'll check the standard stance. When the stem area changes, everything gets confusing… What never ...

We replaced the battery with a Shorai unit. The battery was abnormally weak. We removed it, charged it, and headed home. Something felt damp? Dilute sulfuric...

Let's continue. We'll reuse the needle valve. This rubber type lasts quite a long time. Unless the tank has severe rust or the gasoline gets stale, I don't t...

This one turned out to be surprisingly difficult. I'll say it again: Decoboco is not a custom shop. I needed to return the needle to standard, but this cap w...

Unusually, we're using a 70–90 degree vent banjo fitting. This is how it looks when finished. Master cylinder side. The bending is the job of the fittings an...

Finally time for the rear brake disc replacement. It's in pretty rough shape. It's sad how many people don't pay attention to the rear brake disc. The rear c...

Beco really shines during the Obon holidays? We're making the wheels just a little bit wider. We finished it with Cerakote. It's a really nice color. There's...

OEM carburettor maintenance + (OH) + polishing grip heater and other work requested. Before removing it, I'm wondering... it's so small! This way or that way...

Inspection, coil & NGK power cable replacement, Sunstar rear brake complete maintenance kit, and Newtech oil change—quite the job list.   I've been turn...