Production– tag –

Let's install the Z1R fairing. ↑ This is the positioning jig. We'll use scrap stainless steel pipe for simple positioning. We're making it flexible enough to...

The band clamp fix worked at first, but it kept coming loose—that's no good. Time to improve it. I got some material from a famous muffler craftsman the othe...

We had a lot of visitors today, probably because of the nice weather. I spent the gaps between jobs tinkering on this project. I found some rib stock, so I c...

Time just keeps passing by. My apologies. Back to work after a long break.   Replacing the old cast iron disc. It's a Sunstar Premium Racing disc. Since...

Continuing with the Yoshimura backstep installation. It's so dusty—I really don't like that. If I could cut it with a bit more finesse and get it right to th...

Since the heel was hitting during racing, let's fabricate a new bracket with a revised layout. Two machined parts and one bent piece. We'll proceed in a dire...

It would look cool if we shaved down the bottom case. First, we cut. We'll clean up the frame side nicely, fabricate a bracket to secure the step, and weld i...

Originally we planned to cut the tail pipe and modify the layout, but it turned out to be a mounting error, so let's fabricate an extension bracket instead. ...

Let's check the fuel cap passage. The customer reported stalling symptoms only on the highway during cruising. There have been various causes in the past, an...

Let's install a PAM MOSFET regulator. The wiring and connectors are included, making it a highly convenient kit that we use regularly. With the headlight on ...