Production– tag –

Let's do front maintenance (fork OH). → The stem ended up needing work too~ Am I the only one who thinks it's a good idea to check the stem when you remove t...

Inazuma 1200 Oil-cooled Katana inspection, carburettor maintenance OH (+ polishing), front maintenance (fork OH), Newtech engine oil change, and Yoshimura te...

Let's overhaul the rear caliper. Fluid was leaking heavily and damaged the wheel paint. When I pulled back the dust boot, there was a rough, crusty feel. It ...

Continuing from before. There are marks on the head cover where the chain has made contact. It's unclear whether this happened recently or long ago. Let's ru...

We received a request for inspection, Newtech oil change, valve adjustment, master tank bracket fabrication, and more. First, we got a request to swap out th...

Continuing with Deco-mainte. The rear master cylinder overhaul was also requested, so we got right to it. That's how it turns out. The internal operation is ...

Let's perform some Deco-mainte. First up is chain cleaning. A clean one that's quick to work on is always appreciated. It's so clean that protection is prior...

GSX-R750RK inspection, ETC relocation, and Deco-mainte work requested. The storage compartment is very small, so we wanted to gain a bit more space. The hass...

Before delivery... click... wait, the battery? Dead. When I checked the charging more carefully... hmm, something's off. We'll swap in a MOSFET regulator, a ...

Inspection, oil change, and number plate holder fabrication. We'll change the oil. This time it's ELF MOTO4 TECH 10W-50. While we're at it, we can do chain c...