Vehicle Inspection– tag –

This is a Bandit 1200 that recently passed inspection. Let's perform a Deco-mainte service. The lever had some oil on it. We'll replace the boots. The shift ...

We switched to a multi-reflector headlight, so I'll measure and adjust it for you. It's running around 30,000 yen. It seems to have increased by 5,000 to 10,...

It progresses gradually. The GPZ900R is a rare sight at our shop. The anodized swing arm with its subtle finish shows scratches easily, so I'm not fond of it...

We cleaned the body and performed only float chamber inspection, cleaning, and O-ring replacement. When you do delicate work like this, you risk running into...

GSF1200 inspection, oil-cooled maintenance, mini maintenance, intake manifold replacement, multi-reflectors and more. It suddenly has a nice modern look. It'...

We had a lot of foot traffic today, but we just kept plugging away at the work without letting it distract us. There were some areas with wear and some witho...

Following up from yesterday, let's continue with the oil-cooled maintenance. We're starting the oil-cooled maintenance this morning. The damper condition is ...

The wear on the 1-1 rocker of the MN was surprisingly good, which seemed unusual. Wear is basically present, but it didn't look too bad. This type uses shims...

  Let's perform oil-cooled maintenance. Now that the inspection is complete today, we'll proceed with the oil-cooled maintenance. The engine damper show...

This is an Inazuma 1200 Katana. We're doing the inspection and some minor modifications. We're replacing the master cylinder and changing it to a top-mounted...