Z [Air-cooled]– tag –

Poor charging output equals stalling partway through, so we're concerned about voltage. Bend it Rib it Burr it It still flexes a bit, so we decided to Add a ...

I definitely noticed the headlight was dim during the inspection. It's a telltale sign, in a way. The regulator was already replaced a while back. I measured...

And just like that, it's finished. After thinking it through, this was the only way to go. The caliper side uses a 90-degree fitting. By some miracle, we had...

Hooray! Shin-Hotaka parking lot. Air cleaner box intake. Moving on to the front wheel. The bearings look fine. The axle runout is zero—excellent condition. I...

This nearly original Z1000R1 is looking as clean as ever. Inspection, Deco-mainte, chain and sprocket replacement, and ELF oil change on the agenda. Removed ...

The lucky day update project "Starting from the frame: KZ1000/KZ1000MK2/Z1R" is on hold for now. I have a backlog of tasks piling up, and I feel bad about wo...

We've hit that season where things don't move along as smoothly as we'd like. Pre-Golden Week and pollen season hitting at the same time! Let's take it easy ...

Today is a lucky day for us~ Ah~ steady progress. I think the planning stage is the most fun part? Continuing with the swingarm. The rear caliper support is ...

Continuing with the swingarm adaptation. Tomorrow is a lucky day. I took a whole day off to play for the first time in a while. Making the axle shaft side pl...

Let's think about the rear brake configuration. I've been thinking about what to do with the rear brake for a while now. This time the wheel is a Marchesini ...