デコボコ– Author –

Check the main ground wire from time to time.   This is the main ground wire. It's quite important, so it's a part worth replacing after a certain perio...

Mostly JB-1. Modern aluminum wheels are so light! Aftermarket wheels generally have the air valve positioned nicely. Tires are BT-016 PRO. Both front and rea...

There was a parts ordering mix-up, so I'm assembling the carburettor partway through. Since cylinders 1-4 and 2-3 have separate fuel supply, it's pretty stra...

Let's fabricate an inner fender.   It's SUS304-HL, but if we let it float freely, we'll be safe. I didn't have confidence making it in one go, so I fabr...

Today we're fabricating a battery case and electrical plate. Nothing particularly special about the finish. It's an ordinary shape, and I apologize for that....

Let's get some fabrication work done. The customer requested to open up the space under the seat (a scooter-style tune). Since the MOSFET regulator is large,...

I cut about thirty cable ties to clean up the wiring—they're convenient, but moderation is best.   The wiring is so dense it's almost dizzying to look a...

Let's disassemble the carburettor. We'll give the surrounding area a light cleaning before disassembly. The float gasket is hard and brittle, but fortunately...

We picked up this GSX-R1100M the other day. It had been sitting for a long time, and the owner wants to bring it back to life. The condition is pretty sharp ...

Let's perform valve clearance adjustment. #1 IN #1 EX #2 IN #2 EX #3 IN #3 EX #4 IN #4 EX All cams were in excellent condition with no scuffing. The clearanc...