デコボコ– Author –

Flat-Rate Motorcycle Inspection, WESTCO Battery, and ETC Relocation. Here's the current state. As the owner said, it's pretty rough and ready. But mass-marke...

We've received a request for the ever-popular H2 master tank bracket fabrication and digital temp gauge installation. I knew about it from the previous owner...

Let's start by disassembling the carburetor. This carburetor is in excellent condition with no corrosion. That's reassuring. The slide valve shows minimal we...

It's too late once the main harness fails. Once it's discontinued, restoring the old existing harness will cost about the same. Replacing it now means you sh...

Let's perform Deco-mainte. The wheel bearings should be fine as they are. We'll clean the brake discs thoroughly since we only get the chance to do this at t...

Flat-Rate Motorcycle Inspection Deco-mainte Brake Caliper OH Maintenance request. The interior shows no major corrosion and is in excellent condition. The re...

It's the height of summer. The strain on the oil is enormous. Fork seal area cleaning, lubrication, and inspection. We performed an overhaul on this SKF prev...

Let's refresh with front maintenance + SKF & A.S.H. overhaul. We can also polish corroded parts like these as an add-on. By cleaning things up alongside ...

Let's modify and install the Akrapovic Silencer S-Y10SO11-HAP (for YZF-R1M). We welded the TI silencer inlet at an angle for a clean installation. The inlet ...

Tire change, wheel bearing maintenance, and NUTEC oil change. We recommend wheel bearing maintenance every 20,000 to 30,000 kilometers or so. They'll keep wo...