デコボコ– Author –

The inspection is complete, so let's get to work. First, we'll clean the chain. Let's make sure the rotation is nice and smooth. We'll clean up the surroundi...

The tank is back, so let's get to work. The tire air valve is deteriorated, so I'll replace it for you. The bearings look fine as they are. The caliper was d...

We stripped the original tank, polished it, and finished it with a single coat. The clear coat has cured, so we'll get it mounted right away. Of course, it w...

Convenient products are being sold these days. It contacts the meter bracket, so I'll grind it away. Attaching and removing it is a hassle with the wiring ge...

I'm fabricating aluminum side covers. Since this is my first attempt, I'm looking forward to future improvements. The design lacks any ingenuity—I just set t...

Additional work: fabricating the oil cooler hose—a simple job, or so it should be. But when you turn the handlebars, the fairing touches. I'd like to lower i...

Let's perform Deco-mainte. Starting from the front. The SKF bearings show friction buildup over time, so lubrication is definitely necessary. Let's clean the...

Deco-mainte (inspection and maintenance) request. This time we're starting from the rear. The chain plate is showing rust, so it might be worth replacing it ...

Request from ⑨. Starting with the front—it's holding up surprisingly well with no leaks, which is honestly remarkable. The wheel bearings are still in good s...

It's come loose again… The bolt is out of stock, so I'm stuck. The starter clutch housing mounting bolts look fine. It looks like the surfaces aren't making ...