デコボコ– Author –

It's a bit hard to make out. First, I found two spots. Fuel is seeping slowly from around the weld bead on the tank mount bracket. It's the area I'm pointing...

Let me get the inspection ready for you. Even with the relay installed, we're barely hitting 15,000 cd. We'll have to go with a fully charged battery. There ...

I'll get everything ready for the inspection. Despite its age, it's producing sharp light output. The readings are solid. The tail lamp area is a pain to dis...

We received a request for GSX-R1000 K6 Nissin caliper replacement and SUS brake hose fabrication. They're adapting a radial-mount Nissin caliper. Currently i...

I positioned the hazard switch near the left handlebar switch. I mounted the relay inside the right side cover. There was a bracket sticking out, which came ...

Continuing from the other day. First up is the NUTEC oil change. The 750 uses a different filter, so let's be careful about that. We've replaced the fluid. W...

The tank leak might be a more obscure spot than I thought… I haven't been able to pinpoint the location yet. The oil light is coming on. Since I disassembled...

The clutch suddenly stopped engaging, so we pulled into the pit. NEW OLD When you touch it, it crumbles to pieces. We should definitely announce when a certa...

That tail cowl is quite sexy. There was a little play in the steering, so I adjusted it. Grease ages over time, so let's clean it thoroughly and replace it w...

GSX-R750 inspection, Deco-mainte, and oil change work requested.   We remove the bodywork all at once and get to work. The front wheel bearings look goo...