デコボコ– Author –

The pad pin is stuck and won't come out. Let's work around it without a helicoil. A drill will create a taper, so let's use a milling cutter to clean it up. ...

Things are taking longer than expected and I'm getting anxious. With the weekend rush approaching, I haven't been able to deliver the bike yet, and I reflect...

Rear maintenance / Chain case installation / Motorcycle inspection / Oil and fluid replacement / NGC / BITO shaft and more I grumbled a bit while attaching t...

The inspection was completed quite a while ago, and I apologize for the delay in the follow-up. The ZRX is a model with impressive longevity. Between the 110...

Continuing. There were no major deviations. The fluid is in so-so condition. It looks like it should be replaced soon. The coated bulbs show surprisingly lit...

Let's continue. The side stand is a spot where you really want to apply grease thoroughly. The lever has almost no oil on it. As for the brake lever, we corr...

Thank you for your patience. We're making steady progress. Bandit 1200 inspection, Deco-mainte, and undercowl installation request. The condition isn't bad, ...

BITO Magtan, 2P Big Brembo, machined rear Brembo, and Works Expand installation. All parts are customer-supplied; installation only. The sharp-edged caliper ...

Let's relocate the petcock. I fabricated a shared bracket so the petcock can be secured. I used the steering damper mounting hole. There's no RES, but I thin...

It's a CRF250. We changed the oil and tires. I apologize for not taking photos.