Everyday Events (Work Log)– category –

Z1000R1 Flat-Rate Motorcycle Inspection, Carburettor Maintenance, Self-Point Maintenance, MOSFET Regulator, and more on the job. The regulator sits under the...

We received a request to install an OP sensor and LED unit on a GSX-R1100J H2 master tank and more. We're connecting an oil pressure sensor to the Active met...

Continuing with the Yoshimura backstep installation. It's so dusty—I really don't like that. If I could cut it with a bit more finesse and get it right to th...

Since the heel was hitting during racing, let's fabricate a new bracket with a revised layout. Two machined parts and one bent piece. We'll proceed in a dire...

The tail pipe side bracket broke, so let's fix it. The existing bracket broke and curled up, so we'll make a patch and keep costs down. The shape is distorte...

It would look cool if we shaved down the bottom case. First, we cut. We'll clean up the frame side nicely, fabricate a bracket to secure the step, and weld i...

Let's move on to the remaining work. The spark plug cap has a crack. It's using an aftermarket cord and cap with an intermediate connector, so let's replace ...

Let's perform carburettor maintenance. Number 1 air cleaner side Number 1 engine side. All the others are in the same condition with dirt and debris accumula...

Let's install the Yoshimura ST-1 cam.   First, we remove the standard camshaft. It's in excellent condition with no scoring. It looks like the IN#3 cam ...

GSX-R600 inspection and mini maintenance request. Let's clean up the chain and lubricate it. After applying chain oil, wipe it clean for the best condition. ...