Blog

As always, it's finished beautifully. The careful masking and packing are meticulous, so I can always rely on them with confidence. I'm happy with how clean ...

We're making progress little by little. It looks like some expert made and is selling this. The owner really knows their stuff! I thought it was stylishly bl...

Let's perform a valve clearance adjustment. To be honest, I don't think valve noise gets too bad very often. What does happen is the cam can seize, the rocke...

Today we're going to do some oil-cooled maintenance. Recently, starter motor O-ring replacement has been included as part of the package too. It's great to b...

Let's install the GALE SPEED Wire Clutch Holder KIT 28/30MM.   It's an excellent product with an adjustable ratio. Including the brake master, I rate GA...

The cut sheet metal goes tumbling down the slope at quite a speed… It's noisy, and there's something unsettling about using material that's fallen on the gro...

For electrical peace of mind, I decided to install a PAMS MOSFET regulator. I always use this universal-type version. It's pretty big—the surface area makes ...

We used what we could and made it look the part. Let's change the fluid. Ideally once a year, or at minimum every two years is better. I made a bracket for t...

Let's do some self-service point maintenance. The aluminum fittings look like this, so you need to be careful. Amazingly, it doesn't leak—I'm impressed. Firs...

Now let's get to the actual work. We'll wipe down the chain thoroughly and give it a good cleaning. The idling, which had felt sluggish, now sounds like a pr...