Bandit– tag –

Finishing up yesterday's remaining work. We'll be replacing the rear wheel bearing. We measured the distance collar and placed it inside the wheel—the feelin...

Well, hello there! Today we're going to do some rear maintenance. Let's take off the Pokidam. The monoshock is inconvenient to clean and has become a nest of...

Let's disassemble the front fork. It's looking quite sharp. There's quite a lot of rust. If it keeps building up like this, it'll need to be replaced. There'...

No matter how much you protect and cover things, the worries never end…let's replace the disc and wheel bearings. It's looking pretty solid—the oil is holdin...

Time really flies—let's get started on the front end work. There's plenty of oil, but it was pretty gritty. The lower seal is bent and showing some friction....

from Mie Front/Rear Maintenance OH・Sunstar Campaign Disc・Oil-Cooled Maintenance・Wheel Bearing Maintenance・Flat-Rate Motorcycle Inspection・New Tech reque...

Three days straight at Aiyama Manufacturing. We've been working hard to achieve a sharp finish on the GPZ750TURBO full titanium exhaust. FROM Kyoto, we also ...

Sorry for the wait. We finished it today after the test ride as well. When the cam and rocker arm area get refreshed, the engine really does feel a lot quiet...

Just to be safe, it's good to check the valve timing. I hadn't seen valve timing in ages, so I had to think about it for a moment… The cam, rocker arm, and s...

Today we'll do oil-cooled maintenance plus replace the camshaft area. The generator damper didn't show severe deterioration. For some reason, there were sign...