Front Maintenance– tag –

It's been a few years and just under 20,000 kilometers since the last front maintenance. Since it was time for a fork oil change, let's check the stem while ...

Left and right master cylinders, brake and clutch hoses, and OHLINS steering damper installation. We've been using the S50 tank as the standard lately. We we...

The customer requested installation of an oil-cooled slipper clutch. We removed the standard clutch. There's some discoloration from heat. Every time I work ...

Front maintenance + SKF & A.S.H. Overhaul…… an additional ¥70,000 was requested. It came right off. The grease has hardened too. The contact surface is s...

Let's continue. I want to make sure to visually confirm the race press-fit. I got carried away and thought about doing the upper side too, but that would cre...

We're performing front maintenance and stem replacement. It looked like it would fit as-is, but minor machining was needed. First we replace just the stem an...

GSX1400 Since the bottom case looks nice, I'll protect it carefully before removing it. I choose protective materials that can be reused, and by making this ...

This one came out sharp again—quite the troublemaker. If oil is applied properly, you won't see corrosion like this. There are still plenty of GSXR1100 and s...

GS1200SS Blue/White Front maintenance SKF Rear maintenance OH and more—this is the job request. Since the rear alone wouldn't cut it, we also had the collect...

Let's disassemble the fork. You need to know about runout. We measure it with a dial gauge like this, but if the work table isn't sturdy enough, the weight o...