GU74– tag –

I thought it over from various angles and decided to make the heel guard bigger. I want to stand the ribs up, but there are few places where I can secure it,...

The cord was inserted into the coil. It's a slightly unusual layout, but the serviceability should be better. The cap is oriented toward the coil side. It's ...

Let's install the Watanabe SP2. The included bracket makes removal difficult. We don't take it off often, but it gets in the way surprisingly when we remove ...

We didn't forget the work. The sub-harness just never arrived from the supplier. We peeled away what we could and then wiped it clean. There's quite a bit of...

• Since I work alone at the shop, I can't handle a large volume of jobs. Before requesting work, why not try looking for a shop in your neighborhood first? •...

We do take on custom work, but since we're not fundamentally a custom shop, our work is limited to what we can handle.   We've had it for about a month ...

It's too late once the main harness fails. Once it's discontinued, restoring the old existing harness will cost about the same. Replacing it now means you sh...

Let's adjust the valve clearance. Using too much liquid gasket on the head cover will cause problems later. It's best to avoid it if possible. Basically, the...

The inspection is already done, so let's get the oil-cooled maintenance work done. The engine damper looks like an original part. It's quite worn from vibrat...

We received a request to install an OP sensor and LED unit on a GSX-R1100J H2 master tank and more. We're connecting an oil pressure sensor to the Active met...