Oil-Cooled Katana– tag –

Let's work on the fine details when it rains. The switch worked fine too. I just realized the mirror holder is missing. For now, this is ready to start. &nbs...

It's a rainy weekend. I'd like to send it out for frame straightening sometime next week. With this slider in place, the engine is safe. On bikes like the GS...

Let's fix the dent in the swingarm. The ribs are standing up, so it's been difficult to sand it down properly. We'll replace the head cover, but I suggested ...

We'll work on corrections to the right side. Since we don't have just the right attachment, we'll machine an M16×P1.25 thread into steel to make one.   ...

Swaged brake lines require a bit of technique to install correctly. Make sure the hose doesn't twist when you fit it. Some folks install brake hoses themselv...

Without any Katana parts attached, it really does look bare. We started with an estimate, but since we couldn't imagine what we'd find, we inspected the part...

   We changed it to NUTEC NC50★ There were other items, but we didn't take photos of them.

Well then     NUTEC mid grade and filter     Borrowed the chain case from the Ninpoco for a bit Long &     Clearance is tight. ...

So     radial     radial     this is     it's super tough, so     I hurried over to Togashi Engineering ★ I...

Well, well The weekend is here now     The inspection was completed the other day, so we're moving on to the requested work     First up ...