Rear Maintenance– tag –

It looks like it's going to rain tomorrow too, so let's skip the inspection prep and get the carburetor assembled instead. We do a light cleaning with baking...

The removed carburetor has been sitting idle. First, let me get everything organized (*^-^*) There's a bit of powder rust here. For now, I've disassembled it...

We'll perform a clutch release and master OH. : The image is from after completion ('ω') Marking on the pedal side is more reliable than marking on the shift...

Even though I'm cutting back on work quite a bit... somehow it never seems to end. I feel that vibe. Well, never mind. A beautiful GSF1200 that's been ridden...

The Bandit 1200 K6 is a recent bike, I thought… but it's already been about 12 years.That makes sense, since it has a carburetor. Is there already a generati...

Today we obtained the inspection certificate, so we've installed the fairings and completed the test ride too ('ω')ノ We said the synchronization was fine, b...

Let's replace the stem bearings. We're always working hard to make sure the job can proceed without any tricks ('ω')ノ Humans are constantly heading down the...

Here's the work we're doing ('ω')ノ (these are photos after the work...) Let's overhaul the swingarm! When removing the wheel, wrapping this warmer cover aro...

Non-Unicorn GSX1200S Inazuma 1200 oil-cooled Katana—this is the first time I've laid eyes on one. It's been built nicely, using original parts as much as pos...

December feels oddly lacking in year-end atmosphere, doesn't it? This year, the sense of seasons—or rather, the sense of months—seems off. I find myself thin...