Vehicle Inspection– tag –

Inspection and carburettor maintenance requested. Pretty worn condition. The diaphragm is soaking in a half bath to keep it from stretching. With all the rig...

Coken black, swapped to Brembo 40mm calipers. First, I mark the pads: right inner/right outer, left inner/left outer. That way you don't have to write it aga...

Inspection, Brembo caliper, master cylinder replacement, ELF oil change, coolant replacement—we handled it all. First up: oil and filter replacement. This ti...

This is a continuation. #1 EX #1 IN #2 EX #2 IN #3 EX #3 IN #4 EX #4 IN All clearances from the previous valve adjustment remained unchanged. No cam scuffing...

A rare Type II model. Inspection, oil-cooled maintenance, and electroless nickel bolts—all on the agenda. Oil-cooled maintenance for the first time in six ye...

Continuing from before. Even if it's just for show, I want to clean it up nicely. Got it cleaned up nicely. I was somewhat surprised—this is the first time I...

A GSF1200 with low mileage is now quite rare. I have a strong feeling the GSF1200 is heading toward extinction. This one came in for an inspection and oil-co...

A customer asked about installing a crab-style piece on the rear. When I machine a press-fit collar, I'm always worried about getting it in properly. The con...

Now, continuing on. First, I consider where I want to attach the parts. Then I think about whether there will be any issues during the maintenance work befor...

Once the bodywork comes off, the wiring is in quite a state—it's functioning, but there are a lot of question marks. Let's clean it up with the future in min...