VF Series– tag –

Let's swap it out for a TI EX. The layout is quite sharp, so it was challenging. Since it's a one-piece unit, there's no play, so I had to push and pull quit...

Let's install HID. Interestingly, there are no wires in the visible area. I routed everything to the rear, and while I could have chosen to use or not use a ...

The headlight fogs up from the inside. It's not serious dirt, so if you polish it occasionally, the appearance improves dramatically. Everything requires a l...

The wiring harness was in a truly unfortunate state—it was enough to make your eyes hurt. For now, we removed it. Not many people are happy with mounting usi...

The RVF400 is such a great bike—it makes me want one all over again. Inspection, oil change, muffler replacement, and various other parts and so on. We repla...

Let's relocate the helmet holder and seat opener. I cut it up and bent it to look like this. The frame on the side was removable, so I decided to fix it by w...

It looks like it's progressing, but it's not moving forward as much as we'd like. I did my best to keep it as low as possible. When the hose layout is tight,...

Wheel bearing position adjustment/Let's adjust the distance collar. Before removing it, you need to know by marking how it was assembled on both the left and...

Continuing from before. It's surprisingly clean. There's a slight problem though. The handlebar stopper bolt is pretty galled up. I'll deburr and check the f...

The VFR750F Interceptor is in truly beautiful condition. Today we're performing the front maintenance system+. Pink indicates the direction of travel. There'...