Z [Air-cooled]– tag –

We're relocating the digital temperature meter. The request was to move it from the original top bridge. I fabricated a small bracket for it. It's always a t...

GPZ750 carburettor maintenance (+) OH and other work requested. Most of the oil had leaked out, so we'll replace the seals. The grime was too stubborn to rem...

We install the PAMS main harness, fuse kit, MOSFET regulator, headlight relay, and more. No matter how you look at it, it won't fit as-is. Since the unit is ...

Let's remove the old harness. We'll clean it and touch up any damaged spots with touch-up paint. There are quite a few areas where things have come loose. Th...

We received a request for Z1000LTD main harness replacement and more.   We welded it up, leveled it, installed a helicoil, and we're good to go. Since w...

I didn't know there were no off-the-shelf Brembo support products available. The customer arranged this for us. SS ITO brand. The disc step wear is severe, s...

A beautiful KZ1000. We're doing an intake manifold swap and New Tech oil change. The throttle return was sluggish, and we'd discussed whether it might be the...

NGC Exhaust

Let's swap out the meter. We embedded a PIVOT. The speedometer has a slightly different shape. In the end, we ground down the bracket to make room. It won't ...

Meter replacement/relocation, handlebar replacement, lens replacement, and direct battery relay installation. We use a Daytona relay. You can make one yourse...