デコボコ– Author –

Fastener installation that was left halfway through. Or rather, cowl installation. Last time we stopped after installing the upper section. ↑   We bent ...

It's progressing gradually. Machining from a solid rod is a pain. But I don't have any thick-walled pipe like this on hand… I'll use OEM parts packed togethe...

The shaft is BITOR&D at 25φ. Double-sided cutting, huh… It wasn't as easy as I thought… I wonder if I can actually make it. Since I don't have much mater...

This is what came after. Finally got it assembled! No matter what I did, the fuel level wouldn't stabilize... Ah, I see now... That was quite educational. Th...

Cam cam glug glug. Let's do the oil-cooled maintenance. The damper was wearing down at a good pace. Cleaned it out thoroughly Swapped it for a later-model da...

Jumping around here and there, I'm not sure how far we've gotten with the updates...   We applied Cerakote to the bottom case. Since it's an ultra-thin ...

And here's more~ We remove the control components where possible and clean and lubricate them. The pedal works great too~the input and return become smooth a...

Continuing. Moving to the front. There's some mysterious lubrication. It's seeping and looks dirty. Even with plenty of grease applied to the axle... well. T...

This is from a while back. Better late than never, so I'm updating it now. Starting from the back. Oil should be applied just enough and no more. I can't rec...

When replacing the battery, there are always three options. • Shorai battery • WESTCO battery • Daytona battery I hope we can match your budget and specifica...