デコボコ– Author –

Basically we skip FI synchronization, but this time the running condition was so poor that we decided to adjust it. ZX12R is similar in feel. Being a later m...

After the ZX14 inspection and consultation, we start with a thorough check and perform Deco-mainte work. Wrapping the cover around the wheel makes removal an...

Inazuma 1200 D.I.D ZVM-X & Sunstar Service Kit + request. It's only lightly soiled, which is helpful. We avoid spraying brake cleaner and similar product...

PAMS MOSFET universal kit with connectors and wiring included—very convenient. I replaced the spark plugs while I was at it. The timing was a bit off. Now I'...

We removed the carburetor to replace the harness, so we gave it a light cleaning. While we're at it, we'll replace the throttle cable too. Cleaning and lubri...

Let's inspect the starter clutch. The assembly is already discontinued… It's a male-threaded type, and we don't have the puller in stock. We'll arrange one s...

GSX1100S main harness replacement, wheel bearing maintenance, Deco-mainte, NewTec oil change and more on request. For an air-cooled four-cylinder, thirty min...

Continued: Rear section] Let's perform maintenance on the swingarm and linkage area. The bearings are well-lubricated and in good condition. No impact marks ...

Continuing with the rear section: let's perform maintenance on the swingarm and linkage areas. For Suzuki bikes, removal takes 30 minutes. Bearing extraction...

Suzuki Across 250 DID & Sunstar Chain Kit, NUTEC Oil Change and More. We're on the job. It's a bit wet. We cleaned it up, so let's check again later. The...