デコボコ– Author –

Let's continue. I want to make sure to visually confirm the race press-fit. I got carried away and thought about doing the upper side too, but that would cre...

We're performing front maintenance and stem replacement. It looked like it would fit as-is, but minor machining was needed. First we replace just the stem an...

It's a stock cafe racer. You really feel the difficulty of getting original parts. We swapped the exhaust for a Daishin unit. Looking at it now, that's quite...

The inspection is complete, so let's get started on Deco-mainte. The control levers benefit from occasional disassembly, cleaning, and lubrication—this preve...

We'll install a USB power outlet. After deliberating on where to mount it, we decided on the fork. We welded it without creating a back bead to avoid scratch...

We're relocating the digital temperature meter. The request was to move it from the original top bridge. I fabricated a small bracket for it. It's always a t...

GPZ750 carburettor maintenance (+) OH and other work requested. Most of the oil had leaked out, so we'll replace the seals. The grime was too stubborn to rem...

Flat-Rate Motorcycle Inspection, Self-Point Maintenance, and NUTEC Oil Change request. Since it's not that old, I'll perform light maintenance. It feels grea...

NUTEC Oil Change, Mini Maintenance, and More service request. This time we're blending 1 litre of the top grade into the mid grade. Subtly good stuff. The ex...

Let's perform rear maintenance (+) OH. It's rare to see a bike rusted this badly. I was quite surprised. Here are the parts we're replacing. It feels good to...