デコボコ– Author –

VFR750R (RC30) The lever area is in great condition. Whether or not the pivot points are lubricated makes a big difference in wear on the master cylinder bod...

I didn't know there were no off-the-shelf Brembo support products available. The customer arranged this for us. SS ITO brand. The disc step wear is severe, s...

BITO R&D JB-1 A solid wheel always has the air valve at the bottom. It's not always the case, but since some OEM wheels don't follow this, there are inst...

The clutch is slipping, so let's install an FCC kit. Let's check the current condition. Only the steel plates were replaced and 2 mm was added, but it didn't...

Let's perform oil-cooled maintenance. People often ask if performing oil-cooled maintenance will improve how the bike runs, but unless the valves are severel...

This is the GS1200SS from the other day. It's the usual small-part fabrication. I think about how to keep things simple and efficient, and how to connect it ...

This one came out sharp again—quite the troublemaker. If oil is applied properly, you won't see corrosion like this. There are still plenty of GSXR1100 and s...

GS1200SS Blue/White Front maintenance SKF Rear maintenance OH and more—this is the job request. Since the rear alone wouldn't cut it, we also had the collect...

This is a request for a GS1200SS in red and black with a Flat-Rate Motorcycle Inspection, wheel paint, wheel bearing maintenance, and more. The paint work is...

Deco-mainte and NUTEC oil change There are many overlapping points, so we kept it light. There was some oil residue, but it's old. However, there are signs o...