デコボコ– Author –

A beautiful KZ1000. We're doing an intake manifold swap and NUTEC oil change. The throttle return was sluggish, and we'd discussed whether it might be the ca...

GSF1200 Stock Carburettor Maintenance+ (OH)……¥53,400 I don't think there are any mistakes, but let me double-check. I'll replace the starter valve too. If th...

GSF1200 Stock Carburettor Maintenance+ (OH)……¥53,400 It's running a bit rough. At idle it's sputtering and cutting out. Let's take a look. The inside of the ...

Hmm. The generator connector had melted, so I replaced and repaired it. Using the same connector shape will definitely be better going forward. The insulatio...

Continuing on. The outer surface was dirty, so we covered it up. The fluid was also dirty. The nipple was clogged... This is what happens when there's no ble...

Sorry for the long wait. Things are moving right along now. OHLINS, FCR, brake hose, and so on, plus power outlet installation. At this point, I thought it w...

STACK ST867 bracket remake. We narrowed down the pattern to three options and went with the less common approach. We considered methods like the stock style ...

      With the new year, I have a fresh, blank page. I want to make this year's page one I can read back through without vague scribbles, a ye...

It looks like we'll wrap up 2014 safely. Since the website renewal around September 2013, I've noticed a dramatic improvement in efficiency when it comes to ...

NGC Exhaust