デコボコ– Author –

Let's perform oil-cooled maintenance. The engine damper was fairly worn. The generator damper still has good elasticity and is in condition appropriate for t...

Advantage Nissin 4P+AL Piston A rugged, no-frills design. And since it's 90 mm, it can be installed without a support bracket—a really convenient caliper. We...

This is a GS1200SS in mint condition. D.I.D ZVM-X&Sunstar Service Kit + ... ¥52,800 The gold looks absolutely beautiful. Installation and everything else...

Let's disassemble the fork. You need to know about runout. We measure it with a dial gauge like this, but if the work table isn't sturdy enough, the weight o...

Front maintenance (Fork+) Flat-Rate Motorcycle Inspection NUTEC oil change and coil change. For now we've hung it up. I'd like to make something a bit better...

Gasoline was dripping from the intake manifold, so let's replace it. The air cleaner box in the rear came loose, which was good. I wish they'd stop using Phi...

The green came back before I knew it... I really like that subtle color. I'll disassemble it. I start by loosening the cylinder rod fixing bolt. Sometimes pe...

Bandit 1250 Front maintenance + SKF & A.S.H. Overhaul…… ¥70,000 and so on. The mileage is low and it's the latest model, so everything progresses smoothl...

From the second inspection onward, we may change the work content as needed. The oil content is good. We replaced the boots. The oil is well retained and in ...

The VMAX1200—Yamaha really nails the design level on this one. The inspection is already complete, so we move on to maintenance. Checking bearing movement is...