Blog

Let's make an oil catch tank. First, the license plate bracket. We could remake it, but I'd probably end up second-guessing myself, so I'll give it a fresh d...

We'll touch up small parts. The inside of the fender makes contact, so we're rounding it off with a 3R radius all the way around. Relieving it with something...

We'll continue with the work. Forced open and close—one pull. It's got quite a sharp, tight fit. Let's remake it. We couldn't find the right length, so we fa...

OVER OV-10A is a rare specimen. Let's get it running again. This was a long time ago. It's in a fluffy condition we've never seen before—heavily rusted. Hmm....

D.I.D ZVM-X&Sunstar Service Kit + At our shop, we recommend Daido for chains and Sunstar for sprockets, as they also perform OEM manufacturing for variou...

GPZ750 Battery Charge D.I.D ZVM-X & Sunstar Service Kit + request. We investigated why the voltage was dropping. We confirmed the generated voltage and c...

Bandit 1200 NUTEC oil change and various adjustments requested. We replaced it with a customer-supplied Sunstar rear disc. The caliper wasn't very dirty, but...

The engine wouldn't start, so we picked it up. A large amount of fuel had leaked into the crankcase, and it took considerable time to drain and flush it. The...

We received a request to install PIAA LED headlight bulbs on a GSF1200. A reassuring package. Since these are for four-wheel vehicles, they come with two bul...

GSXR1100N main harness replacement and more work requested. We remove everything that can be taken off and move forward all at once. Bypass modifications, no...