Blog

SUNSTAR disc and SSITO carrier support installation. The SUNSTAR disc has the cotter pins reversed from the original, sitting flat. The distance from the sup...

Let's install the AS Uotani. Mounting the unit directly with double-sided tape is honestly questionable. When you remove it, the adhesive stays on the bike b...

Various requests to go along with the inspection. We fabricated the bracket in stainless steel, so now we move on to drilling holes. There's a lot of cutting...

Let's refresh the small parts. We'll also fabricate a new brake master cylinder tank bracket. Excellent clarity—H2 spec The lever and holder didn't match, so...

We received a request for GSX1100S harness replacement and electrical system installation. We're also upgrading to a PAMS MOSFET regulator. Since there was a...

PAMS High-Performance Fuse System · MOSFET Regulator· NUTEC Oil Change request. The MOSFET regulator has a large surface area and generates little heat, maki...

GSX1100S inspection and Deco-mainte service request. The throttle area was well maintained and looked clean. Both levers feel good. Rather than applying oil ...

Let's disassemble the front fork. There's a little dirt, but it's in relatively good condition. It's fortunate that this fork doesn't require cylinder disass...

The customer reported an odd feeling in the steering and requested front maintenance plus SKF & A.S.H. overhaul. The condition isn't very good. First off...

The customer requested carburettor maintenance along with the motorcycle inspection. The ZRX1100 is a lightweight classic bike. It looks current because of t...