Blog

Continuing from before. It's pretty tangled up, but by maintaining a gentle radius and avoiding strain on the wiring, it ends up looking like this. I'd like ...

First, let's strip it down. Since we're not reusing switches and such, it's a bit easier. There are a lot of spots like this throughout. Electricity can easi...

Let's replace the main harness. It stopped partway through and came in on a flatbed. Let's track down the cause.             &n...

If vacuum cannot be obtained, we confirm synchronization with this gauge. The pedal has shielded bearings, so we just cleaned it and applied a light coat of ...

Bandit 1200 K6 Flat-Rate Motorcycle Inspection Deco-mainte NUTEC Oil Change request. We remove the front and rear wheels and check them. It's good to clean t...

Let's perform Deco-mainte. I don't think it will run amazingly well, but by disassembling and checking it once, I believe we'll discover many things we would...

The Inazuma 1200 Katana is a great-running oil-cooled machine. #1 Gasoline was seeping from the joint, so we took on the job. The condition was good overall....

Let me check the front area. The axle came out, so that's good news for now. Unfortunately, it's bent… which means the fork is bent too… so we're putting thi...

GSXR1100L Crash Repair We'll proceed with the areas that can be handled smoothly. Right away, the knock pin is missing… We've dealt with this before, so we h...

1200 to 1300 engine 75,120 km, but there may have been a full-scale rollover before, so who knows what the actual mileage is? You can't estimate a motorcycle...